Mudhugger Mk2 Rear
Designed and made in the heart of the UK from 100% recycled polypropylene and building on the award winning, tried and tested Rear Mudhugger, now with 3 signficant improvements over their original 2012 design. 1. Utilising reusable quick release straps to fit to the Helitape protected seat stays, makes fitting and removing a matter of seconds2. Where the Mudhugger sits on the seat stays they have incorporated rubber inserts which aids grip and improves damping3. An all new push-fit BB extender is included. Designed to protect bearings and the BB area from mud and debris build up, in even the most extreme conditions. This has been designed to be as thin as possible, so that it can be easily trimmed to suit most bike rear triangle designs* These can be fitted to most mountain bikes with disc brakes, including those with externally routed cables and hoses. The Original version is designed for 26" Mountain Bikes both suspension and hardtails Length - 560mm Width - 100mm wide at the widest part. Weight - 230g Braces are approx 140mm long. Does not include a bottom bracket front extension piece The MK2 MEDIUM version is designed for frames with a seat stay angle from 34 degrees down to 27 degrees: Length - 690mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 280g excluding fittings. The MK2 LARGE version is designed for frames with a shallow seat stay angle of below 28 degrees down to 22 degrees: Length - 760mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 300g excluding fittings. All Medium and Large MK2 Rear Mudhuggers come supplied with: 2 x Helitape sheets to protect seat stays.4 x Reusable hook and loop straps2 x Rubber damping strips1 x BB extension pieceFitting instructions. We recommend that you periodically check the condition of the Helitape for signs of wear. Spare packs of Helitape are available seperately. Replace as necessary. Also regularly check the velcro for build up of dirt etc, wash and dry as required. Replace these if any signs of tearing or the velcro hook and loop becomes worn and loses its stickiness. Spare straps are available seperately. Zip-ties can also be used to fit the Mk2 Rear Mudhugger to your bike for a semi-permanent mounting if you prefer. If your seat stay brace is located very close to the tyre, you may not be able to utilise the BB extender. If you're unsure, email us a photo of this area of your frame before placing your order.
Price now:
£33.06
Mudhugger Mk2 Rear
Designed and made in the heart of the UK from 100% recycled polypropylene and building on the award winning, tried and tested Rear Mudhugger, now with 3 signficant improvements over their original 2012 design. 1. Utilising reusable quick release straps to fit to the Helitape protected seat stays, makes fitting and removing a matter of seconds2. Where the Mudhugger sits on the seat stays they have incorporated rubber inserts which aids grip and improves damping3. An all new push-fit BB extender is included. Designed to protect bearings and the BB area from mud and debris build up, in even the most extreme conditions. This has been designed to be as thin as possible, so that it can be easily trimmed to suit most bike rear triangle designs* These can be fitted to most mountain bikes with disc brakes, including those with externally routed cables and hoses. The Original version is designed for 26" Mountain Bikes both suspension and hardtails Length - 560mm Width - 100mm wide at the widest part. Weight - 230g Braces are approx 140mm long. Does not include a bottom bracket front extension piece The MK2 MEDIUM version is designed for frames with a seat stay angle from 34 degrees down to 27 degrees: Length - 690mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 280g excluding fittings. The MK2 LARGE version is designed for frames with a shallow seat stay angle of below 28 degrees down to 22 degrees: Length - 760mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 300g excluding fittings. All Medium and Large MK2 Rear Mudhuggers come supplied with: 2 x Helitape sheets to protect seat stays.4 x Reusable hook and loop straps2 x Rubber damping strips1 x BB extension pieceFitting instructions. We recommend that you periodically check the condition of the Helitape for signs of wear. Spare packs of Helitape are available seperately. Replace as necessary. Also regularly check the velcro for build up of dirt etc, wash and dry as required. Replace these if any signs of tearing or the velcro hook and loop becomes worn and loses its stickiness. Spare straps are available seperately. Zip-ties can also be used to fit the Mk2 Rear Mudhugger to your bike for a semi-permanent mounting if you prefer. If your seat stay brace is located very close to the tyre, you may not be able to utilise the BB extender. If you're unsure, email us a photo of this area of your frame before placing your order.
Price now:
£33.06
Top Picks
eBay
New
£33.06
£34.99
New | £33.06£2.95 Delivery | Store |
Currently Unavailable
Product Description
Designed and made in the heart of the UK from 100% recycled polypropylene and building on the award winning, tried and tested Rear Mudhugger, now with 3 signficant improvements over their original 2012 design. 1. Utilising reusable quick release straps to fit to the Helitape protected seat stays, makes fitting and removing a matter of seconds2. Where the Mudhugger sits on the seat stays they have incorporated rubber inserts which aids grip and improves damping3. An all new push-fit BB extender is included. Designed to protect bearings and the BB area from mud and debris build up, in even the most extreme conditions. This has been designed to be as thin as possible, so that it can be easily trimmed to suit most bike rear triangle designs* These can be fitted to most mountain bikes with disc brakes, including those with externally routed cables and hoses. The Original version is designed for 26" Mountain Bikes both suspension and hardtails Length - 560mm Width - 100mm wide at the widest part. Weight - 230g Braces are approx 140mm long. Does not include a bottom bracket front extension piece The MK2 MEDIUM version is designed for frames with a seat stay angle from 34 degrees down to 27 degrees: Length - 690mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 280g excluding fittings. The MK2 LARGE version is designed for frames with a shallow seat stay angle of below 28 degrees down to 22 degrees: Length - 760mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 300g excluding fittings. All Medium and Large MK2 Rear Mudhuggers come supplied with: 2 x Helitape sheets to protect seat stays.4 x Reusable hook and loop straps2 x Rubber damping strips1 x BB extension pieceFitting instructions. We recommend that you periodically check the condition of the Helitape for signs of wear. Spare packs of Helitape are available seperately. Replace as necessary. Also regularly check the velcro for build up of dirt etc, wash and dry as required. Replace these if any signs of tearing or the velcro hook and loop becomes worn and loses its stickiness. Spare straps are available seperately. Zip-ties can also be used to fit the Mk2 Rear Mudhugger to your bike for a semi-permanent mounting if you prefer. If your seat stay brace is located very close to the tyre, you may not be able to utilise the BB extender. If you're unsure, email us a photo of this area of your frame before placing your order.
Product Specifications
General | |
|---|---|
Color | black |
colour | black |
Material | plastic |
Size | medium |
type | mudguard |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.