Ener-J Plug And Play Emergency Battery Module For T561 Led Bulkhead 3 Hour
Retrofit your ENER‑J T561 LED Bulkhead into emergency-ready lighting with this plug-and-play emergency module (T564). Designed for simplicity and safety, it activates automatically during power cuts, delivering up to 3 hours of maintained light at 1 W. With built-in LiFePO₄ battery, smart diagnostics, and manual/auto test support, it’s ideal for corridors, stairwells, and utility spaces where reliability matters most. Simple Plug‑and‑Play Installation – Installs directly into ENER‑J T561 bulkhead, converting it into emergency lighting without rewiring. Reliable 3-Hour Backup – Provides 1 W emergency output to connected LED load, staying lit up to 3 hours during power outages. Low Standby Power Mode – Consumes <3 W in standby; draws <0.2 W in low-power idle mode for energy efficiency. Smart Battery Management – Charges up to 200 mA; fully charges within 24 hours; includes LiFePO₄ 3.2 V 1800 mAh battery with 3-year warranty and over-current, over-discharge, and surge protection. Multiple Safety Features – Green LED indicates charging; automatically runs diagnostics and supports both manual and auto-test modes. Technical Specifications SpecificationDetailsModel / SKUEmergency Module – T564Rated Input Voltage220–240 VAC, 50/60 HzMax Input Current0.06 A @ 230 VACInrush Current30 A (cold start, 100 µs pulse)Power Factor≥ 0.5 @ 230 VACStandby Power Consumption< 3 WBattery Charging Current (Max)200 mABattery Charging TimeUp to 24 hoursEmergency Output Power1 WEmergency DurationUp to 3 hoursOutput Current (Normal / Emergency)100–15 mA / 20–5 mAOutput Voltage Range10–60 V DC (Normal); 50–180 V DC (Emergency)Battery TypeLiFePO₄ 3.2 V, 1800 mAhBattery Warranty3 yearsDriver RequirementsSurge current ≤ 8 A; Input ≤ 3 A; Output ≤ 2 ACharging IndicatorGreen LED ON = charging; OFF = faultTest ModeManual or Auto Test selectableOperating Temperature–25 °C to +60 °CStorage Temperature–40 °C to +80 °CRelative Humidity≤ 85 %IP RatingIP20 (when installed within bulkhead).
Price now:
From
£25.88
To
£29.99
Price History:
Details:Ener-J Plug And Play Emergency Battery Module For T561 Led Bulkhead 3 Hour
Retrofit your ENER‑J T561 LED Bulkhead into emergency-ready lighting with this plug-and-play emergency module (T564). Designed for simplicity and safety, it activates automatically during power cuts, delivering up to 3 hours of maintained light at 1 W. With built-in LiFePO₄ battery, smart diagnostics, and manual/auto test support, it’s ideal for corridors, stairwells, and utility spaces where reliability matters most. Simple Plug‑and‑Play Installation – Installs directly into ENER‑J T561 bulkhead, converting it into emergency lighting without rewiring. Reliable 3-Hour Backup – Provides 1 W emergency output to connected LED load, staying lit up to 3 hours during power outages. Low Standby Power Mode – Consumes <3 W in standby; draws <0.2 W in low-power idle mode for energy efficiency. Smart Battery Management – Charges up to 200 mA; fully charges within 24 hours; includes LiFePO₄ 3.2 V 1800 mAh battery with 3-year warranty and over-current, over-discharge, and surge protection. Multiple Safety Features – Green LED indicates charging; automatically runs diagnostics and supports both manual and auto-test modes. Technical Specifications SpecificationDetailsModel / SKUEmergency Module – T564Rated Input Voltage220–240 VAC, 50/60 HzMax Input Current0.06 A @ 230 VACInrush Current30 A (cold start, 100 µs pulse)Power Factor≥ 0.5 @ 230 VACStandby Power Consumption< 3 WBattery Charging Current (Max)200 mABattery Charging TimeUp to 24 hoursEmergency Output Power1 WEmergency DurationUp to 3 hoursOutput Current (Normal / Emergency)100–15 mA / 20–5 mAOutput Voltage Range10–60 V DC (Normal); 50–180 V DC (Emergency)Battery TypeLiFePO₄ 3.2 V, 1800 mAhBattery Warranty3 yearsDriver RequirementsSurge current ≤ 8 A; Input ≤ 3 A; Output ≤ 2 ACharging IndicatorGreen LED ON = charging; OFF = faultTest ModeManual or Auto Test selectableOperating Temperature–25 °C to +60 °CStorage Temperature–40 °C to +80 °CRelative Humidity≤ 85 %IP RatingIP20 (when installed within bulkhead).
Price now:
From
£25.88
To
£29.99
This site contains affiliate links for which we may be compensated.
The Range
6.96% ( -£2.00)
New
£26.75
Rackhams
0.00% (~ £0.00)
New
£28.75
Currently Unavailable
Product Description
Retrofit your ENER‑J T561 LED Bulkhead into emergency-ready lighting with this plug-and-play emergency module (T564). Designed for simplicity and safety, it activates automatically during power cuts, delivering up to 3 hours of maintained light at 1 W. With built-in LiFePO₄ battery, smart diagnostics, and manual/auto test support, it’s ideal for corridors, stairwells, and utility spaces where reliability matters most. Simple Plug‑and‑Play Installation – Installs directly into ENER‑J T561 bulkhead, converting it into emergency lighting without rewiring. Reliable 3-Hour Backup – Provides 1 W emergency output to connected LED load, staying lit up to 3 hours during power outages. Low Standby Power Mode – Consumes <3 W in standby; draws <0.2 W in low-power idle mode for energy efficiency. Smart Battery Management – Charges up to 200 mA; fully charges within 24 hours; includes LiFePO₄ 3.2 V 1800 mAh battery with 3-year warranty and over-current, over-discharge, and surge protection. Multiple Safety Features – Green LED indicates charging; automatically runs diagnostics and supports both manual and auto-test modes. Technical Specifications SpecificationDetailsModel / SKUEmergency Module – T564Rated Input Voltage220–240 VAC, 50/60 HzMax Input Current0.06 A @ 230 VACInrush Current30 A (cold start, 100 µs pulse)Power Factor≥ 0.5 @ 230 VACStandby Power Consumption< 3 WBattery Charging Current (Max)200 mABattery Charging TimeUp to 24 hoursEmergency Output Power1 WEmergency DurationUp to 3 hoursOutput Current (Normal / Emergency)100–15 mA / 20–5 mAOutput Voltage Range10–60 V DC (Normal); 50–180 V DC (Emergency)Battery TypeLiFePO₄ 3.2 V, 1800 mAhBattery Warranty3 yearsDriver RequirementsSurge current ≤ 8 A; Input ≤ 3 A; Output ≤ 2 ACharging IndicatorGreen LED ON = charging; OFF = faultTest ModeManual or Auto Test selectableOperating Temperature–25 °C to +60 °CStorage Temperature–40 °C to +80 °CRelative Humidity≤ 85 %IP RatingIP20 (when installed within bulkhead).
Product Specifications
General | |
|---|---|
Color | light/green |
Material | mode |
Brand | Ener-J |
Size | 1 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.